VERANDAHS | CARPORTS | PERGOLAS | PATIOS | DECKS | SCREENS | OUTDOOR BLINDS 


 Design | Create | LIVE!

News & Views

Should decking grooves face up or down?

Posted on June 20, 2015 at 7:50 PM

Installing Decking boards facing upwards has the potential to reduce the lifespan of your deck.

 

There is a long-standing and surprisingly fiery debate on about if grooves (Reeding) on a decking board are intended to be placed face up or face down. Many have waged intense campaigns supporting one side or the other and decking installers can be found sitting in both camps.

The answer though is quite a simple one; boards should unequivocally be placed grooves down.

 

What are decking grooves for?

The grooves or reeds on a decking board are not there as an anti-slip measure, nor are they there to make your decking look prettier. They are designed to allow for airflow underneath the boards to stop moisture and mould build up. In fact, many board manufacturers' warranties are voided if the boards have been installed with the groove side facing upwards, as this can seriously jeopardise the longevity of the boards. If your installer has put them in incorrectly, then you may have grounds to ask them to redo the job the right way (unless this is what you asked them to do, of course).

 

A grooved deck may feel nice underfoot for a while, but once grime, mould or algae start to grow in the ruts, the boards can quickly become discoloured and will actually be more slippery to walk on, thus defeating the original purpose of laying them grooved side up. They're also far more difficult to sweep when they're laid grooved-side up.

 

The one exception to this rule may be laying them groove side up on a ramp required for wheelchair access, as the rubber tires will have more traction on a grooved surface.